Hoy toca actualización de firmware de las gordas, al menos para la Fujifilm X-H2S. Quedaba claro que el nuevo procesador X Processor 5 llegaba con una potencia de computación que daba mucho margen de maniobra para mejorar el algoritmo inicial de autoenfoque de la nueva generación de cámaras. El uso de la inteligencia artificial permite ir refinando las funciones de enfoque automático de sujetos y en esta actualización se prometen muchos avances en las configuraciones ya existentes, a la vez que se añaden «drones» e «insectos» a la lista de sujetos previa.
Por otra parte, tanto en la X-H2S como en la Fuji X-H2 se introduce la compatibilidad con el trípode-grip TG-BT1, así como se mejora el rendimiento con el grip de transmisión inalámbrica FT-XH. Por último, se amplía la funcionalidad del objetivo de zoom motorizado Fujinon XC 15-45mm F3.5-5.6 OIS PZ.
Actualización de firmware 3.00 para la Fujifilm X-H2S
📖 Descarga el apéndice del manual para el nuevo firmware en este enlace
Función mejorada de detección de sujetos basada en IA
1) Detección mejorada de los tipos de sujetos existentes
Se ha mejorado considerablemente el rendimiento de la detección del sujeto en situaciones que antes eran difíciles de detectar, como contraluces, sujetos que miran de reojo y sujetos pequeños. La función de detección del sujeto puede utilizarse en más situaciones que nunca.
2) Nuevos tipos de reconocimiento automático
Además de los tipos de sujetos actuales de rostros y ojos humanos, animales, aves, automóviles, motocicletas, bicicletas, aviones y trenes, ahora es capaz de reconocer insectos y drones. Establezca «AJUSTE DETECCIÓN DE SUJETOS» en «AVES» cuando desee detectar insectos y en «AVIÓN» cuando desee detectar drones。
Algoritmo AF mejorado para el seguimiento de sujetos en movimiento
(1) El algoritmo de predicción de movimiento se ha mejorado y permite un seguimiento estable de sujetos que se mueven a gran velocidad dentro del encuadre.
(2) The AF focusing speed has been improved when continuous shooting is started by simultaneously pressing the AF-ON button and the release button while the camera is out of focus. The AF starts to focus at a faster rate than before, even in situations where the situation changes moment by moment, such as in sports. This makes it difficult to miss a shutter release opportunity, even in situations such as sports where the situation changes from moment to moment.
Tripod grip, “TG-BT1” has been available.
When the camera and “TG-BT1” are connected via Bluetooth, you can shoot still images and movies while holding the grip, as well as zoom in on lenses (*1) with an electric zoom function.
*1:Lenses with an electric zoom function (“Power Zoom Lens”)
・FUJINON LENS XF18-120mmF4 LM PZ WR (Ver.1.00 or later)
・FUJINON LENS XC15-45mmF3.5-5.6 OIS PZ (Ver.1.10or later)
File Transmitter (FT-XH) performance enhancement.
The live view frame rate from camera to terminal has been Improved when connecting the “FT-XH”.
Note-1:
Firmware update for the camera and “FT-XH” is required to enable this function.Make sure to update the camera firmware to the latest firmware before updating the “FT-XH” firmware.
Menu title change.
(1)”IMAGE TRANSFER ORDER” has been renamed to “COMMUNICATION STATUS”, which appeared through the following operation flow.
・[SCREEN SET-UP] ➔ [DISP. CUSTOM SETTING] ➔ [COMMUNICATION STATUS]
(2)“COMMUNICATION STATUS” can now be used to toggle the image transfer order and connected device displays on or off simultaneously.
“Bluetooth DEVICE LIST” addition.
“Bluetooth DEVICE LIST” has been added in the “Bluetooth/SMARTPHONE SETTING” in the “NETWORK/USB SETTING” menu.
Bug fixes.
(1)Firmware bug has been fixed, which caused the freezing that occurs before and after AF is performed.
(2)Other minor bugs have been fixed.
Actualización de firmware 1.20 para la Fujifilm X-H2
📖 Descarga el apéndice del manual para el nuevo firmware en este enlace.
Tripod grip, “TG-BT1” has been available.
When the camera and “TG-BT1” are connected via Bluetooth, you can shoot still images and movies while holding the grip, as well as zoom in on lenses (*1) with an electric zoom function.
*1:Lenses with an electric zoom function (“Power Zoom Lens”)
・FUJINON LENS XF18-120mmF4 LM PZ WR (Ver.1.00 or later)
・FUJINON LENS XC15-45mmF3.5-5.6 OIS PZ (Ver.1.10 or later)
Note-1:
For the “TG-BT1” initial settings and operating instructions, please download the “Tripod Grip (TG-BT1) User’s Manual” from our website (See the link below).
・Tripod Grip (TG-BT1) User’s Manual
Note-2:
Firmware update for the camera and lens is required to enable this function.Make sure to update the camera firmware to the latest firmware before updating the lens firmware.
・FUJINON LENS XC15-45mmF3.5-5.6 OIS PZ Firmware update Ver.1.10
File Transmitter (FT-XH), performance enhancement.
The live view frame rate from camera to terminal has been Improved when connecting the “FT-XH”.
Note-1:
Firmware update for the camera and “FT-XH” is required to enable this function.Make sure to update the camera firmware to the latest firmware before updating the “FT-XH” firmware.
Menu title change.
(1)”IMAGE TRANSFER ORDER” has been renamed to “COMMUNICATION STATUS”, which appeared through the following operation flow.
・[SCREEN SET-UP] ➔ [DISP. CUSTOM SETTING] ➔ [COMMUNICATION STATUS]
(2)“COMMUNICATION STATUS” can now be used to toggle the image transfer order and connected device displays on or off simultaneously.
“Bluetooth DEVICE LIST” addition.
“Bluetooth DEVICE LIST” has been added in the “Bluetooth/SMARTPHONE SETTING” in the “NETWORK/USB SETTING” menu.
Other minor bug has been fixed.
🆕 Precio mínimo para Luminar NEO, licencia permanente o anual (Black Friday 2024, ya activo)
Actualización de firmware 1.10 para el Fujinon XC 15-45mm F3.5-5.6 OIS PZ
When the camera (*1) and tripod Grip, “TG-BT1” are connected via Bluetooth, zooming can be controlled with “T/W button” on the “TG-BT1”.
*1:Cameras and firmware versions that have connectivity with “TG-BT1”
・X-H2S: Ver.3.00 or later
・X-H2: Ver.1.20 or later
・X-T5: Ver.1.00 or later
・X-T4: Ver.1.70 or later
・X-T3：Ver.4.50 or later
・X-S10: Ver.2.60 or later
・X-T30 II: Ver.1.20 (*2)
・X-T30: Ver.1.50 (*2)
*2:T/W button on the “TG-BT1” does not function with those cameras.
Note-1:
Firmware update for the camera is required to enable this function. Make sure to update the camera firmware to the latest firmware before updating the lens firmware.
List of Compatible Cameras
The zooming and focusing buttons on the following camera menus will function when the lens are attached with the proper cameras (*3).
Camera menus that will be supported:
(1)[SETUP MENU]➔ [BUTTON/DIAL SETTING]➔ [TOUCH SCREEN SETTING]➔ [TOUCH ZOOM]
(2)[SETUP MENU]➔ [BUTTON/DIAL SETTING]➔ [LENS ZOOM/FOCUSL SETTING]
・ [CONSTANT SPEED ZOOM (8 steps)]
・ [CONSTANT SPEED FOCUS (8 steps)]
・ [CONSTANT SPEED ZOOM/FOCUS (Fn) OPERATION] for switching “START/STOP SWITCH” or “ACTIVE WHILE PRESSING”
・ [ZOOM RING ROTATE]
・ [ZOOM/FOCUS CONTROL RING] for switching “Zoom” or “Focus”
*3:Proper cameras and firmware versions
・X-H2S: Ver.1.00 or later
・X-H2: Ver.1.00 or later
・X-T5: Ver.1.00 or later
・X-T4: Ver.1.60 or later
・X-T3：Ver.4.40 or later
・X-S10: Ver.2.50 or later
Note-1:
Firmware update for the camera is required to enable this function. Make sure to update the camera firmware to the latest firmware before updating the lens firmware.
List of Compatible Cameras
Aperture control parameters have been optimized to improve exposure tracking during movie recording.
👉 ¿Es la primera vez que actualizas el firmware? ¿Necesitas refrescar la memoria? Aquí tienes una guía que detalla cómo actualizar el firmware de cámaras y ópticas de la Serie X.
No te pierdas ninguna entrada del blog de Fujistas
📢 Recibe notificaciones de las últimas entradas de Fujistas en tiempo real: canal de Fujistas en Telegram / Canal de Fujistas en WhatsApp.
Última actualización el 2024-11-17 / Enlaces de afiliados / Imágenes de la API para Afiliados
