Fujifilm ha publicado actualizaciones de firmware con las habituales correcciones de errores menores para las X-T5 (v. 2.02), X-H2 (v. 3.02), X-H2S (v. 5.02), GFX 50S II y GFX 100S. Por otra parte, además de solucionar pequeños fallos, el nuevo firmware 1.11 de la Fujifilm X-S20 mejora el rendimiento de su autoenfoque y la versiones 3.0 de la GFX 50R y la 5.00 de la GFX 100 introduce la compatibilidad con la aplicación móvil XApp.
Actualización de firmware 2.02 para la Fujifilm X-T5
- Se corrigió el error de firmware por el que en raras ocasiones el sujeto enfocado se oscurece momentáneamente cuando se graba vídeo con el modo S.
Actualización de firmware 3.02 para la Fujifilm X-H2
- Se corrigió el error de firmware por el que en raras ocasiones el sujeto enfocado se oscurece momentáneamente cuando se graba vídeo con el modo S.
Actualización de firmware 5.02 para la Fujifilm X-H2S
- Se corrigió el error de firmware por el que en raras ocasiones el sujeto enfocado se oscurece momentáneamente cuando se graba vídeo con el modo S.
- Se soluciona el bug por el cual aparece ruido de bandas en el área de sombras en vídeos grabados en resolución Full HD con F-log2.
Actualización de firmware 1.11 para la Fujifilm X-S20
- Mejora del rendimiento de seguimiento de los sujetos en movimiento mediante el algoritmo AF mejorado.
- El algoritmo de predicción de movimiento se ha mejorado para permitir un seguimiento estable de sujetos que se mueven a alta velocidad en el encuadre.
- La velocidad de enfoque AF se ha mejorado cuando se inicia la ráfaga de disparo continuo presionando simultáneamente el botón AF-ON y el disparador mientras la cámara está desenfocada. El AF comienza a enfocar a un ritmo más rápido que antes, incluso en situaciones en las que el escenario cambia rápidamente, como en fotografía de deportes. Esto hace que sea difícil perder la oportunidad de disparar el obturador, incluso en situaciones de acción donde la situación cambia de un momento a otro.
- Se soluciona el error «WRITE ERROR» que aparecía en casos excepcionales cuando las imágenes se guardaban en tarjetas de memoria de baja velocidad de transferencia de datos.
- Se solucionó el error de firmware que mostraba una visualización del EVF diferente a la exposición real de la imagen cuando se captura la fotografía con un objetivo de zoom y las siguientes condiciones.
- Modo de disparo: “Modo M (Exposición manual)”
- Posición de zoom: «Zoom in»
- Se corrigió el error de firmware por el que en raras ocasiones el sujeto enfocado se oscurece momentáneamente cuando se graba vídeo con el modo S.
Actualización de firmware 3.00 para la Fujifilm GFX 50R
📖 Descarga el apéndice del manual para el nuevo firmware en este enlace.
- The firmware for each model supports new application software “FUJIFILM XApp” for GFX and X series cameras.
“FUJIFILM XApp” is the advanced application software for the current one, “FUJIFILM Camera Remote”, with which wireless communication becomes more stable and faster so that images and movies transportation from the camera becomes more smooth and comfortable with the smartphone and tablet terminal.
Moreover, the operation with the smartphone and tablet terminal becomes much simpler than the current application software, since all the data transportation operations, except for the “Bluetooth Pairing” between camera and the application software required at the first time only, are completed with the smartphone and tablet terminal.
Adding on the “Live View Mode” and access/download functions of the data in camera, several new functions are available, such as “Backup/Restore” to store the setting data in the shooting and setup menus, “Timeline” to review the shooting information of the camera/lens, shooting count/location, etc. and “Activity” to show the accumulated summary of the shooting count total, film simulation usage, etc., which should make GFX and X series cameras attractive more and more.Note-1: Please see NEWS RELEASE for the details of “FUJIFILM XApp”.
Fujifilm releases the FUJIFILM XApp for the GFX / X Series of digital camerasNote-2: “FUJIFILM XApp” works with iOS/iPad OS 13 or later and Android OS 11 or later.
Please download the “FUJIFILM XApp” from the following site by selecting the OS version of your smartphone / tablet terminal and the camera.
“FUJIFILM XApp” Download Site - “AREA SETTING” has been added in the “USER SETTING” of the Setup menu, which changed the operation procedure for the initial setting and “TIME DIFFERENCE” setting as follows.
・24 hours display can be selected in “DATE/TIME”.
・Your living location can be selected with the world map as well as “Saving time” can be on and off in “AREA SETTING”.
・“LOCAL” can also be selected with the world map in “TIME DIFFERENCE”.
Note-1: “ARIA SETTING” and “DATE/TIME” menus appear when turning on the camera right after firmware upgrade. So please set up the above items in these menus. - “RESET” function in the Setup menu will change.
・“AREA SETTING” has been added on the list that would not be reset in “SET-UP RESET” function.
・“INITIALIZE” function has been added to reset all settings to default values, other than except for custom white balance. - Some of the menu related to the wireless connection changed as follows.
・“Bluetooth SETTINGS” in “CONNECTION SETTING” of the Setup menu has been changed to “Bluetooth/SMARTPHONE SETTING” and “IMAGE TRANSFER WHILE POWER OFF” has been added in this menu.
・“AUTO IMAGE TRANSFER” has been changed to “AUTO IMAGE TRANSFER” and “SMARTPHONE SYNC. SETTIN” has been changed to “SMARTPHONE LOCATION SYNC” for each. - Some of the menu items of “GENERAL SETTINGS” in “CONNECTION SETTING” of the Setup menu has been change as follows.
・“NAME” and “RESIZE IMAGE FOR SMARTPHONEH 3M” has been moved into “Bluetooth/SMARTPHONE SETTING” menu.
・“GEOTAGGING” has been moved into “SAVE DATA SET-UP” menu.
・“LOCATION INFO” has been moved into “SCREEN SETUP” menu.
・“〔Wi-Fi〕 BUTTON SETTING” has been moved into “BUTTON/DIAL SETTING” menu and changed to “Fn BUTTON SETTING”. - “Bluetooth Pairing Registration” has been added in “FUNCTION (Fn) SETTING” while pushing and holding the DISP/BACK” button, which changed the procedure to connect to the smartphone.
- Even under busy Wi-Fi environment, the connectivity between the application for a smartphone (FUJIFILM Camera Remote) and a camera is improved.
Actualización de firmware 2.02 para la GFX 50S II
- The firmware bug is fixed that the camera rarely freezes when shooting a still image with GF20-35mmF4 R WR attached under the following conditions.
・Zoom position: “Zoom Out”
・Distance between the subject and camera: around 1m to 2m (3 ft to 7ft) - The firmware bug is fixed that the camera freezes when shooting the still image under the following conditions.
・“IMAGE DISP” is set to “CONTINUOUS/1.5 SEC/0.5 SEC”
・ISO sensitivity is set to more than 25600 even if the “IMAGE DISP” setting is “OFF” - Other minor bugs have been fixed.
Actualización de firmware 5.00 para la Fujifilm GFX 100
📖 Descarga el apéndice del manual para el nuevo firmware en este enlace.
- The firmware for each model supports new application software “FUJIFILM XApp” for GFX and X series cameras.
“FUJIFILM XApp” is the advanced application software for the current one, “FUJIFILM Camera Remote”, with which wireless communication becomes more stable and faster so that images and movies transportation from the camera becomes more smooth and comfortable with the smartphone and tablet terminal.
Moreover, the operation with the smartphone and tablet terminal becomes much simpler than the current application software, since all the data transportation operations, except for the “Bluetooth Pairing” between camera and the application software required at the first time only, are completed with the smartphone and tablet terminal.
Adding on the “Live View Mode” and access/download functions of the data in camera, several new functions are available, such as “Backup/Restore” to store the setting data in the shooting and setup menus, “Timeline” to review the shooting information of the camera/lens, shooting count/location, etc. and “Activity” to show the accumulated summary of the shooting count total, film simulation usage, etc., which should make GFX and X series cameras attractive more and more.Note-1: Please see NEWS RELEASE for the details of “FUJIFILM XApp”.
Fujifilm releases the FUJIFILM XApp for the GFX / X Series of digital camerasNote-2: “FUJIFILM XApp” works with iOS/iPad OS 13 or later and Android OS 11 or later.
Please download the “FUJIFILM XApp” from the following site by selecting the OS version of your smartphone / tablet terminal and the camera.
“FUJIFILM XApp” Download Site - “AREA SETTING” has been added in the “USER SETTING” of the Setup menu, which changed the operation procedure for the initial setting and “TIME DIFFERENCE” setting as follows.
・24 hours display can be selected in “DATE/TIME”.
・Your living location can be selected with the world map as well as “Saving time” can be on and off in “AREA SETTING”.
・“LOCAL” can also be selected with the world map in “TIME DIFFERENCE”.Note-1: “ARIA SETTING” and “DATE/TIME” menus appear when turning on the camera right after firmware upgrade. So please set up the above items in these menus. - “RESET” function in the Setup menu will change.
・“AREA SETTING” has been added on the list that would not be reset in “SET-UP RESET” function.
・“INITIALIZE” function has been added to reset all settings to default values, other than except for custom white balance. - Some of the menu related to the wireless connection changed as follows.
・“Bluetooth SETTINGS” in “CONNECTION SETTING” of the Setup menu has been changed to “Bluetooth/SMARTPHONE SETTING” and “IMAGE TRANSFER WHILE POWER OFF” has been added in this menu.
・“AUTO IMAGE TRANSFER” has been changed to “AUTO IMAGE TRANSFER” and “SMARTPHONE SYNC. SETTIN” has been changed to “SMARTPHONE LOCATION SYNC” for each. - Some of the menu items of “GENERAL SETTINGS” in “CONNECTION SETTING” of the Setup menu has been change as follows.
・“NAME” and “RESIZE IMAGE FOR SMARTPHONEH 3M” has been moved into “Bluetooth/SMARTPHONE SETTING” menu.
・“GEOTAGGING” has been moved into “SAVE DATA SET-UP” menu.
・“LOCATION INFO” has been moved into “SCREEN SETUP” menu.
・“〔Wi-Fi〕 BUTTON SETTING” has been moved into “BUTTON/DIAL SETTING” menu and changed to “Fn BUTTON SETTING”. - “Bluetooth Pairing Registration” has been added in “FUNCTION (Fn) SETTING” while pushing and holding the DISP/BACK” button, which changed the procedure to connect to the smartphone.
- The firmware bug is fixed that the color banding rarely appeared in the recorded image with high sensitivity and long exposure setting, such as shooting starry sky in the night.
- The firmware bug is fixed that the camera rarely freezes when shooting a still image with GF20-35mmF4 R WR attached under the following conditions.
・Zoom position: “Zoom Out”
・Distance between the subject and camera: around 1m to 2m (3 ft to 7ft) - Other minor bugs have been fixed.
Actualización de firmware 2.02 para la Fujifilm GFX 100S
- The firmware bug has been fixed, which caused that the color banding rarely appeared in the recorded image with high sensitivity and long exposure setting, such as shooting starry sky in the night.
- The firmware bug is fixed that the camera rarely freezes when shooting a still image with GF20-35mmF4 R WR attached under the following conditions.
・Zoom position: “Zoom Out”
・Distance between the subject and camera: around 1m to 2m (3 ft to 7ft) - Other minor bugs have been fixed.
👉 ¿Es la primera vez que actualizas el firmware? ¿Necesitas refrescar la memoria? Aquí tienes una guía que detalla cómo actualizar el firmware de cámaras y ópticas de la Serie X.
No te pierdas ninguna entrada del blog de Fujistas
📢 Recibe notificaciones de las últimas entradas de Fujistas en tiempo real: canal de Fujistas en Telegram / Canal de Fujistas en WhatsApp.
